Each Transmitter contains a 6 position DIP (Dual-In-Line) switch for the setting of the code that is to be transmitted.
The 6 positions of the DIP switch allows you to select any one of 64 different codes (0 through 63), corresponding to the number that will be displayed on the Display or Monitor Panel.

In addition, for larger systems, the Transmitters are provided in up to 16 code sets (Code Set A through Code Set P), for use with the larger Display and Monitor Panels, allowing you to select and display up 1000 codes.

The 16 Code Sets and the 64 displays that correspond to each code set shown is below.

1. Code Set A,    Codes 000 through 063
2. Code Set B,    Codes 064 through 127
3. Code Set C,    Codes 128 through 191
4. Code Set D,    Codes 192 through 255
5. Code Set E,    Codes 256 through 319
6. Code Set F,    Codes 320 through 383
7. Code Set G,    Codes 384 through 447
8. Code Set H,    Codes 448 through 511
9. Code Set I,    Codes 512 through 575
10. Code Set J,    Codes 576 through 639
11. Code Set K,    Codes 640 through 703
12. Code Set L,    Codes 704 through 767
13. Code Set M,    Codes 768 through 831
14. Code Set N,    Codes 832 through 895
15. Code Set O,    Codes 896 through 959
16. Code Set P,    Codes 960 through 1023

Cepco Products 9540 Owensmouth Ave Chatsworth, CA 91311, USA
Telephone (818) 998-8569 Fax (818) 998-8560

Copyright © Cepco Products, All rights reserved.
Questions?   Comments?   Suggestions?   Send e-mail to: web@cepcoproducts.com