| [Home ][Systems ][Products ][Tech Help ][Contact us ][Links ][Site Map] | |
Alarm Display Panel
Model RX-ADP(series)
| Pricing |
|
|
![]() Features:
The Alarm Display Panels are available in the following sizes: Model RX-ADP32 Model RX-ADP64 Model RX-ADP100 Model RX-ADP500 Model RX-ADP1000 |
DESCRIPTION The Model RX-ADP, Alarm Display Panel, plugs into the
120 V AC power outlet; no additional wiring is needed.
The Alarm signals are received over the AC power wiring from CEPCO Transmitters.
The Alarm Display Panel work with all CEPCO Transmitters. Click on Coding When an Alarm signal is received, the Alarm Indicator light comes ON (Red LED), the Output Relay switches (Form C Relay Contacts), the Buzzer sounds with a pulsed output, and the Transmitter location code (DIP switch setting) is displayed (flashing) in one of three (3) display positions. This Alarm condition is maintained until the unit is reset with the Reset Pushbutton. If additional Alarm signals are received during this time, their location code is displayed in one of the other display positions. A Buzzer Mute switch is located on the back panel. When ON, a Mute Indicator light (Yellow LED) on the front panel indicates that the Buzzer is silenced. The Schematic Diagram of the of the Model RX-ADP is shown below.
You can use the Alarm Display Panel in as many locations as you like. Other Monitor and Display Panels available from CEPCO are: For Application information click on Application Notes |
|
[Home ][Systems ][Products ][Tech Help ][Contact us ][Links ][Site Map]
|
|
|
Cepco Products 9540 Owensmouth Ave Chatsworth, CA 91311, USA Telephone (818) 998-8569 Fax (818) 998-8560 Copyright © Cepco Products, All rights reserved. |
|