Cepco Alarm and Antitheft Plug-in Modules.

	*[Home* ][Systems ][Products ][Tech Help ][Contact us ][Links ][Site Map]**
*Products* *\| Transmitters* *\| Receivers* *\| Monitors/Displays* *\| Boosters/Couplers* *\| Pricing \|*
Professional Powerline Carrier Modules for Safety, Security, and Antitheft Monitoring with No New Wiring
*Smoke Alarm Modules*
Smoke Alarm Interconnect Module, Model TR-SAI	The Smoke Alarm Interconnect Module, Model TR-SAI is used to interconnect smoke detectors without adding new wiring, so that when one is triggered by smoke or fire, they all will sound. *Smoke Alarm Interconnect Module*

Smoke Alarm Module, Model TX-SAM	The Smoke Alarm Module, Model TX-SAM is a miniaturized transmitter intended for hard wire installations with 120 volt Smoke Detectors to transmit a signal in case of alarm or of disconnection. Works with all Cepco Receivers, Monitors, and Display Panels. *Smoke Alarm Module*

Smoke Detector Trigger Module, Model RX-SDT	The Smoke Detector Trigger Module, Model RX-SDT is a single channel miniaturized Receiver, designed for hard wire applications with a ADA compliant Smoke Detector, provides a +9 volt trigger when the unit is activated. Works with all Cepco Transmitters. *Smoke Detector Trigger Module*
*Transmitters*
Thiefbug, Model TX-BUG1	The Thiefbug, Model TX-BUG1 is used for protection against theft of electronic equipment such as Computers (PCs, Macs, Notebooks), TVs, VCRs, Fax Machines, Lab Equipment, etc.,that is intended to remain plugged into an electrical power outlet. Works with all Cepco Receivers, Monitors, and Display Panels. *Thiefbug*

Miniature Transmitter, Model TX-BUG2(series)	The Miniature Transmitter, Model TX-BUG2(series) is a miniaturized transmitter intended for hard wire installations with 120 volt Smoke Detectors or other such Detectors, to transmit a signal in case of alarm. Works with all Cepco Receivers, Monitors, and Display Panels. *Miniature Transmitter*

Plug-in Transmitter, Model TX-BUG3(series)	The Plug-in Transmitter, Model TX-BUG3(series) is a plug-in transmitter that can be triggered from a contact or loop closure, contact or loop opening, or a voltage source (AC or DC). They work with all Cepco Receivers, Monitors, and Display Panels. *Plug-in Transmitter*

Pushbutton Transmitter, Model TX-PBT	The Pushbutton Transmitter, Model TX-PBT is a plug-in transmitter with pushbutton activation, that is intended for use in Panic or Emergency reporting. These are attractively styled for desk or tabletop use, or can be concealed under a desk or table. They work with all Cepco Receivers, Monitors, and Display Panels. *Pushbutton Transmitter*

Transmitter with DC Voltage Output, Model TX-PS1	The Transmitter with DC Voltage Output, Model TX-PS1 is a plug-in unit that, in addition to providing the transmitter function when triggered, supplies a +12 volt DC output to power such devices as PIR Detectors, Motion Detectors, etc. They work with all Cepco Receivers, Monitors, and Display Panels. *Transmitter w/ Voltage Output*
*Receivers*
Buzzer Module, Model RX-BZM	The Buzzer Module, Model RX-BZM is a self-contained, single channel plug-in Receiver, that emits a loud (90db) "beeping" sound when activated. Works with all CepcoTransmitters. *Buzzer Module*

Contact Closure Module, Model RX-CCO	The Contact Closure Module, Model RX-CCO is a single channel plug-in Receiver, that provides a set of isolated Relay contacts (Form C) that switch when activated. Works with all Cepco Transmitters. *Contact Closure Module*

Remote Alarm Module, Model RX-RAM	The Remote Alarm Module, Model RX-RAM is a single channel plug-in Receiver, that provides a 120 volt AC socket that switches HOT when the unit is activated. Works with all Cepco Transmitters. *Remote Alarm Module*

Remote Control Module, Model RX-RCM	The Remote Control Module, Model RX-RCM is a single channel miniaturized Receiver, designed for hard wire applications, provides an isolated Relay output (Form C) that switch when the unit is activated. Works with all Cepco Transmitters. *Remote Control Module*

Flasher Module, Model RX-FLS	The Flasher Module, Model RX-FLS is a single channel miniaturized Receiver, designed for hard wire applications with emergency Signs, provides an isolated Relay output (Form C) that switch at a one second rate when the unit is activated. Works with all Cepco Transmitters. *Flasher Module*
*Monitors/Displays*
Alarm Display Panel, Model RX-ADP(series)	The Alarm Display Panel, Model RX-ADP(series) is a multipl channel (zone) receiver that monitors an annunciates all Transmitter location codes (DIP switch settings) with numerical displays. Latching unit must be manually reset. Works with all Cepco Transmitters. *Alarm Display Panel*

Desk Mounted Monitor Panel, Model RX-MTS(series)	The Desk Mounted Monitor Panel, Model RX-MTS(series) is a multiple channel (zone) receiver that monitors an annunciates all Transmitter location codes (DIP switch settings) with LED indicator lights. Latching unit must be manually reset. Works with all Cepco Transmitters. *Desk Mounted Monitor Panel*

Wall Mounted Monitor Panel, Model RX-MTW(series)	The Wall Mounted Monitor Panel, Model RX-MTW(series) is a multiple channel (zone) receiver that monitors an annunciates all Transmitter location codes (DIP switch settings) with LED indicator lights. Latching unit must be manually reset. Works with all Cepco Transmitters. *Wall Mounted Monitor Panel*
*Boosters/Couplers*
Signal Booster Module, Model TR-BST	The Signal Booster Module, Model TR-BST is a miniaturized module for use in installations where the combination of high current loads and long distances may reduce the signals to below acceptable levels. This unit is available for plug-in or hard wire installations. *Signal Booster Module*

3-Phase Coupler-Repeater, Model CPR-3	The 3-Phase Coupler-Repeater, Model CPR-3 is required in installations that have a 3-phase power distribution system (120V/208V). This will include most commercial and industrial facilities. *3-Phase Coupler-Repeater*

Transformer Coupler-Repeater, Model CPR-1	The Transformer Coupler-Repeater, Model CPR-1 is required in installations that have more than one power transformer, or an auxiliary or emergency power source. *Transformer Coupler-Repeater*
*[Home* ][Systems ][Products ][Tech Help ][Contact us ][Links ][Site Map]**
Cepco Products 9540 Owensmouth Ave Chatsworth, CA 91311, USA Telephone (818) 998-8569 Fax (818) 998-8560 Copyright Cepco Products, All rights reserved. Questions? Comments? Suggestions? Send e-mail to: web@cepcoproducts.com

Professional Powerline Carrier Modules for Safety, Security, and Antitheft Monitoring with No New Wiring